Newly installed black solar panels on a shingled house roof in Kelowna

For your home

Residential Solar Panel Installation in Kelowna, BC

Grid-tied rooftop systems sized to the power your household actually uses, and to the utility that sends your bill.

Rooftop Solar for Kelowna Homes

Residential solar in Kelowna comes down to three questions: how much power the house uses, how good the roof is, and which utility you are on. A south-facing Kettle Valley roof on a house with a heat pump and an EV is an easy yes. A shaded Lower Mission lot with a $70 bill usually is not. We quote both, and we tell you which one you have.

Systems start from $10,000 installed for a small array and reach about $32,000 for a large all-electric home. Before you sign anything you get the system size, the expected annual output, the rebate you actually qualify for and the payback year, all in writing.

Call 250-250-2525 and we can usually say in one short call whether your roof is worth a closer look.

Hillside Kelowna street with solar panels on several homes and the lake below
Sized to your bills, not your roof. Twelve months of usage sets the system size. Covering every square foot rarely pays.

What a Home Installation Includes

Usage-based sizing

We size from twelve months of your FortisBC or BC Hydro bills, not from how big the roof is. Solar pays you back mostly on power you would otherwise buy, so annual use is the number that matters.

Roof survey: planes, pitch, shade and age

Every usable plane gets measured and shade-modelled across the day and the seasons. We also note how many years the roof has left, because panels on a roof that needs replacing soon cost you a removal and reinstall.

Panels, racking, inverter and monitoring

Tier-one all-black panels, racking rated for local snow and wind, and microinverters or optimisers where shade calls for them. App-based monitoring is standard.

Licensed electrical work

All wiring is done by licensed electricians. Some older homes in Rutland and Glenmore need a panel upgrade first. We find that during the survey so it is in the quote.

Permits and utility paperwork

Electrical permit, the interconnection application (FortisBC net metering or BC Hydro self-generation), and the BC Hydro rebate claim where you qualify. We file it and follow it up.

Commissioning and walkthrough

Inspection, switch-on and a walkthrough of your monitoring app, plus what your first bill after solar should look like.

Home Solar Costs in Kelowna

System sizeSuitsInstalled costEst. annual outputEst. annual saving
4 kWSmall home or partial offsetfrom $10,000~4,600 kWh~$670
6 kW1,500–2,000 sq ft homefrom $15,000~6,900 kWh~$1,000
8 kW2,000–2,800 sq ft homefrom $19,500~9,200 kWh~$1,330
10 kW+Large home, heat pump or EVfrom $24,000~11,500 kWh+~$1,670+

Typical Central Okanagan installs at about 14.5¢/kWh blended; savings assume FortisBC net metering. BC Hydro customers can subtract a rebate of up to $5,000, but are paid 10¢/kWh for exported power, so their yearly saving is roughly 20% lower. FortisBC customers currently get no rebate. Your number depends on orientation, shade, panel count and your electrical service. Financing available.

Get a Free Estimate Check your rebate

Why Kelowna Homeowners Call Us

Numbers first

Output, rebate, credit for exported power and payback year on paper, with every assumption shown.

Utility-aware quotes

We check whether FortisBC or BC Hydro serves your address before quoting. It changes the rebate by up to $5,000.

Honest no’s

North-facing planes, heavy shade or a low bill? We will say so, even if it costs us the job.

Re-roof timing

If your roof is due within a few years, we will suggest doing both together and save you paying for a second removal and reinstall.

Find out what solar would do to your power bill.

A free estimate starts with a short phone call. No pressure and no obligation, and you get a straight answer either way.

How a Home Install Runs

  1. 1

    Assessment

    Twelve months of bills, your roof planes and shade, your electrical panel, and which utility serves you. Most of it is done by phone and satellite imagery before anyone visits.

  2. 2

    Design & quote

    System size, expected output, your rebate (if any), credit for exported power and payback year, in writing with the assumptions shown.

  3. 3

    Permits & install

    We pull the permit and file the utility and rebate paperwork. Our team and vetted contractor partners install, usually in one to three days.

  4. 4

    Switch-on

    Inspection, utility approval and commissioning. We show you the monitoring app and what your next bill should look like.

On-site work usually takes one to three days. Permits and utility approval take longer than the install itself, so allow four to eight weeks from signing to switch-on.